Ground geophysics survey

Print PDF


G&DS LLC provides ground geophysical services in data acquisition, processing and interpretation. We carry out following survey methods of the ground geophysics depending on the exploration target of our clients:


Electrical Tomography 

Carbourne Spectral Gamma




Gravity & Microgravity



The main application of them are mineral exploration (Base metals, coal, iron etc), environmental monitoring (nuclear waste, etc), mining (), geotechnical engineering (allocation of voids, faults) and water investigation (detection of water bearing zones. Alluvial locations).


Surface geophysical methods allow subsurface features to be located, mapped, and characterized by making measurements at the surface that respond to a physical, electrical, or chemical property. These noninvasive measurements can be effectively used to provide reconnaissance to detailed geologic information, guide subsurface sampling and excavation, and provide continuous monitoring. The ground geophysical methods provide data at a variety of scales, from the regional geologic setting to site-specific geotechnical investigation.
The ground geophysics methods use the investigational passive and active methods to study the nature of the subsurface formations. The geophysicists use measurements of physical quantities made at or above the ground surface or, more rarely, in boreholes to draw conclusions about consealed geology. In the geophysical technique to be useful in mineral exploration, there must be contrasts in the physical properties of the rocks concerned that are related, directly or indirectly, to the presence of economically significant minerals. The geophysical anomalies, defined as differences from a constant or slowly varying background, may then be recorded. Anomalies may take many different forms and need not necessarily be centered over their source. Ideally, they will be produced by actual economic minerals, but even the existence of a strong physical contrast between ore minerals and the surrounding rocks does not guarantee a significant anomaly. Ground geophysical methods can be classified as either passive (involving measurements of naturally existing fields) or active, if the response of the ground to some stimulus is observed. Passive methods include measurements of magnetic and gravity fields, naturally occurring alpha and gamma radiation, and natural electrical fields. All other electrical and electromagnetic techniques, seismic methods, and some borehole methods that use artificial radioactive sources are active.

Ground geophysics survey

G&DS LLC provides ground geophysical services in data acquisition, processing and interpretation. We carry out following survey methods of the ground 


Borehole geophysics survey

We carry out the borehole logging to get in-situ physical properties of surrounding formation of subsurface area with wide range of logging tools, in open and cased boreholes. 


Consulting Service

G&DS LLC provides, together with our professional partners, the consulting services for the energy, mineral exploration, environmental, geotechnical, ground water and mining investigations .


Contact us

AOS-7, Tsergiin khotkhon-1B, 2nd khoroo Bayanzurkh district, Ulaanbaatar, Mongolia

Telephone:     +976 - 7007 8008
Fax:     +976 - 7007 9009